Practice Questions & Answers :: Cocubes

15.76K

Tot. Mock Test: 65+


Tot. Exam. Sec.: 5+


Total Practice Qs: 41+

NA
SHSTTON
0
Solv. Corr.
0
Solv. In. Corr.
0
Attempted
0 M:0 S
Avg. Time

1 / 41

 Amplitude modulation is the process of

Asuperimposing a low frequency on a high frequency

Bsuperimposing a high frequency on a low frequency

Ccarrier interruption

Dfrequency shift and phase shift

Answer: Option A

Explanation:

Modulating signal will have alower frequency as compared to the frequency of the carrier signal.

Submit Your Solution

Tags: No Tags on this question yet!

NA
SHSTTON
0
Solv. Corr.
0
Solv. In. Corr.
0
Attempted
0 M:0 S
Avg. Time

2 / 41

 The Shannon-Hartley law

Arefers to distortion

Bdefines bandwidth

Cdescribes signaling rates

Drefers to noise

Answer: Option C

Explanation:

In information theory, the Shannon–Hartley theorem tells the maximum rate at which information can be transmitted over a communications channel of a specified bandwidth in the presence of noise.

Submit Your Solution

Tags: No Tags on this question yet!

NA
SHSTTON
0
Solv. Corr.
0
Solv. In. Corr.
0
Attempted
0 M:0 S
Avg. Time

3 / 41

 The data transmission rate of a modem is measured in

Abytes per second

Bbaud rate

Cbits per second

Dmegahertz

Answer: Option C

Explanation:

Modems are generally classified by the maximum amount of data they can send in a given unit of time, usually expressed in bits per second (symbol bit(s), sometimes abbreviated "bps"), or bytes per second (symbol B(s)).

Submit Your Solution

Tags: No Tags on this question yet!

NA
SHSTTON
0
Solv. Corr.
0
Solv. In. Corr.
0
Attempted
0 M:0 S
Avg. Time

4 / 41

 Determine the total discharge time for the capacitor in a clamper having C = 0.01

A5ms

B25ms

C2.5ms

D50ms

Answer: Option B

Explanation:

The capacitor will fully charge or discharge in 5 time constants. So, 5*R*C= 25 ms.

Submit Your Solution

Tags: No Tags on this question yet!

NA
SHSTTON
0
Solv. Corr.
0
Solv. In. Corr.
0
Attempted
0 M:0 S
Avg. Time

5 / 41

 An image uses 512 x 512 picture elements. Each of the picture elements can take any of the 8 distinguishable intensity levels. The maximum entropy in the above image will be

A2097152 bits

B648 bits

C786432 bits

D144 bits

Answer: Option C

Explanation:

Each picture element can be represented by 3 bits. Thus total entropy = 512 x 512 x 3 = 786432.

Submit Your Solution

Tags: No Tags on this question yet!

NA
SHSTTON
0
Solv. Corr.
0
Solv. In. Corr.
0
Attempted
0 M:0 S
Avg. Time

6 / 41

  Light travels along the optical fibers by which mechanism?

ARefraction

BReflection

CScattering

DTotal internal reflection

Answer: Option D

Explanation:


Submit Your Solution

Tags: No Tags on this question yet!

NA
SHSTTON
0
Solv. Corr.
0
Solv. In. Corr.
0
Attempted
0 M:0 S
Avg. Time

7 / 41

 The term responsivity as it applies to a light detector is best described as

Athe time required for the signal to go from 10 to 90 percent of maximum amplitude

Bthe ratio of the diode output current to optical input power

Cthe ratio of output current to output power

Dthe ratio of output current to input current

Answer: Option B

Explanation:

Responsivity measures the input–output gain of a detector system. In the specific case of a photodetector, responsivity measures the electrical output per optical input.

Submit Your Solution

Tags: No Tags on this question yet!

NA
SHSTTON
0
Solv. Corr.
0
Solv. In. Corr.
0
Attempted
0 M:0 S
Avg. Time

8 / 41

 13 dBm is equivalent to

A2 mW

B20 W

C20 Mw

D2 MW

Answer: Option C

Explanation:

P(mW) = 1mW * 10(P(dBm)/ 10)
So, 1dBm = 1.258925mW

Submit Your Solution

Tags: No Tags on this question yet!

NA
SHSTTON
0
Solv. Corr.
0
Solv. In. Corr.
0
Attempted
0 M:0 S
Avg. Time

9 / 41

 A superheterodyne receiver with an IF of 450 kHz is tuned to a signal at 1200 kHz. The image frequency is

A750 kHz

B900 kHz

C1650 kHz

D2100 kHz

Answer: Option D

Explanation:

Image frequency = Signal frequency +2* IF = 1200 + 2*450 =2100kHz

Submit Your Solution

Tags: No Tags on this question yet!

NA
SHSTTON
0
Solv. Corr.
0
Solv. In. Corr.
0
Attempted
0 M:0 S
Avg. Time

10 / 41

 The software that transfers the object program from secondary memory to the main memory is called

Aassembler

Bloader

Clinker

Dtask builder

Answer: Option B

Explanation:

In Computing, a loader is the part of an Operating System that is responsible for loading programs. It is one of the essential stages in the process of starting a program. Because it places programs into memory and prepares them for execution.

Submit Your Solution

Tags: No Tags on this question yet!


Here is the list of questions asked in Cocubes paper Practice questions with Answers. Practice Written Test Papers with Solutions and take Q4Interview Online Test Questions to crack written round test. Overall the level of the Online Assessment Test is moderate. Only those candidates who clear the written exam will qualify for the next round, so practic all the questions here and take all the free tests before going for final selection process of


Most Popular Qs.