Broadcom Ltd Interview Questions and Answers for 7 years Experience
1 / 8
No Discussion on this question yet!
No Tags on this question yet!
2 / 8
No Discussion on this question yet!
No Tags on this question yet!
3 / 8
No Discussion on this question yet!
No Tags on this question yet!
4 / 8
No Discussion on this question yet!
No Tags on this question yet!
5 / 8
No Discussion on this question yet!
No Tags on this question yet!
6 / 8
No Discussion on this question yet!
No Tags on this question yet!
7 / 8
No Discussion on this question yet!
No Tags on this question yet!
8 / 8
No Discussion on this question yet!
No Tags on this question yet!
1 / 9
No Discussion on this question yet!
No Tags on this question yet!
2 / 9
No Discussion on this question yet!
No Tags on this question yet!
3 / 9
No Discussion on this question yet!
No Tags on this question yet!
4 / 9
No Discussion on this question yet!
No Tags on this question yet!
5 / 9
No Discussion on this question yet!
No Tags on this question yet!
6 / 9
No Discussion on this question yet!
No Tags on this question yet!
7 / 9
Generate both the traffic 50:50 percent from ingress, what will be the expected output?
No Discussion on this question yet!
No Tags on this question yet!
8 / 9
Directly connected routers can be connect way ecmp path, but there will be a unnecessarily reserve IP address which can be connect way L2 itself.
No Discussion on this question yet!
No Tags on this question yet!
9 / 9
char *ch = 1000;
int **pptr = 1000;
void *vd = 1000;
ptr++, ch++, pptr++, vd++;
printf("all value ") ?
No Discussion on this question yet!
No Tags on this question yet!
1 / 6
No Discussion on this question yet!
No Tags on this question yet!
2 / 6
No Discussion on this question yet!
No Tags on this question yet!
3 / 6
No Discussion on this question yet!
No Tags on this question yet!
4 / 6
No Discussion on this question yet!
No Tags on this question yet!
5 / 6
No Discussion on this question yet!
No Tags on this question yet!
6 / 6
Dynamic LAG is required to avoid a loop between the node.
Example:
In "S1" static lag is configured and S2 normal STP is running on the port which is directly connected.
No Discussion on this question yet!
No Tags on this question yet!